Compressed Garbage Truck is a new generation of products independently developed and designed by CEEC TRUCKS. Based on the similar products features and advantages of in domestic and abroad market, garbage compactor trucks and upper body kits are beautiful in appearance, excellent in performance and advanced in operation and control. The collection and transportation of urban domestic waste can be achieved by using the back-loaded compaction and bi-axial compression technology. Its comprehensive performance reaches the advanced level of domestic similar products. And to service all customers all over the world, we can design and offer different type rear loader compactor kit based on customer local truck chassis.
The Rear Loader Compactor Truck Body Kit is designed to be mounted on customer local chassis, including, ISUZU, HINO, Mitsubishi, Toyota, Hyundai, etc. Both Left hand drive and Right hand drive available. And mainly used for collecting and transporting domestic waste in cans, in bags and in bulk from urban roads, urban residential areas, communities, large-scale factories and mines, etc. The garbage truck is not suitable for collecting and transporting construction waste, industrial waste and kitchen waste. And mainly have below advaiced features.
a. Elegant appearance, the main components made of high-quality high-strength manganese steel, sound structure, strong rigidity and high strength.
b. Powerful loading capacity, apply the bi-axial compression technology, the volume of domestic waste can be up to 600~800Kg/m3 after compression.
c. Combined electric-air-liquid control, utilize the advantages of electronic control, gas control and hydraulic control to control and convert the energy, thus ensuring the accurate and reliable operation of each mechanism, and improving the reliability and efficiency of operation.
d. The electronic control system adopts the electrical components produced by well-known domestic and foreign manufacturers, and CAN-BUS integrated control is adopted to reduce the failure rate and prevent accidents caused by misoperation.
e. Convenient operation control, the operation control box is respectively installed in the cab and the rear, the operation control box in the cab can be used to control the pushing and unloading and select the operation mode, the operation control box on the right side of the rear can be used to control the operation of the compressing-filling mechanism and the bucket-lifting mechanism, which is quite convenient; especially for working in the landfill, the operator can unload garbage without getting off.
f. Pneumatic control is adopted to open and close the pre-compressor cover, with elegant and simple appearance and friendly operation.
g. During the compression, filling and transportation, the garbage shall be under closed state, and unique technology of "sealing" and "dredging" is adopted to greatly reduce the dripping and spraying of sewage in the process of collection and transportation.
The Electric Control System is a control device specially designed for loading and unloading garbage. Which also can be called CAN-BUS system and widely used on all garbage compactor upper body kits, both 12V and 24V are optional to be suitable for all truck chassis.
The operator can, by virtue of the push-button switch (mounted on the cab and the pre-compressor) and the proximity switch (mounted on the slider, which can check if the stroke at the upper part and bottom part of the slider is in place, if the scraper opens and closes in place), input the command signal into the CAN bus controller via encoding, and then drive the output by the program that has been coded in the controller according to the operation requirements of the garbage truck, which can actuate the corresponding executive element-the electromagnetic valve to act and realize the operation control of garbage truck operation device.
This system, installed with imported high-quality electrical components, is programmed with a variety of control procedures for selection before delivery. The operator can check the input and output via input and output indicators on the programmable controller. And Step-down processing technology has been applied in the power circuit, which can adjust the power input range to 24-30 VDC. As a result, the system is featured with high reliability, simple operation, easy maintenance and other characteristics.
CEEC TRUCKS Garbage Compactor Truck Kits are equipped with CAN Electric Control System and Hydraulic Joystick Control System, mainly used for garbage collection and transportation, and the working aerial can be city street, factory, community and other areas of need. The upper body kits are designed to fully rely on the advantages of the original of local brand truck chassis ISUZU, HINO, Mitsubishi, Toyota, Hyundai, etc, fully consider the product's convenience and reliability, also the chassis technology features. The garbage compactor body material is international standard high strength carbon steel, both internal and external with anti-rust painting, which can effective to avoid rusting. As for compactor body capacity is 6Tons and safety enough to collecting & transporting waste on customer requirement.
The Garbage Compactor Truck upper body kit equipped with new designed CAN control system, multi-function garbage compression system, side climbing ladder, Electric control boxes in cabin and rear of hopper, rear part installed foot pedal, which is customized to collect garbage from different area, two units waste water collection tank can efficiently prevent second pollution during transportation. Cab for the single-row Comfortable seat, nice driving feeling. Therefore, the vehicle is an ideal Fuel Tanker Truck mainly for oil transportation & refueling function.
Whatsapp : +86 13647297999
Email : tom@ceectrucks.com
Email : info@ceectrucks.com
Tel : +86 13647297999
