How to use Isuzu rear loader compactor truck？

Isuzu rear loader compactor truck is a sanitation vehicle specially used for collecting urban residents' domestic garbage and other compressible garbage. It consists of a sealed garbage compartment, a hydraulic system, and an operating system. The whole vehicle is fully sealed, and the sewage during the compression process is automatically compressed and dumped, and all the sewage enters the sewage tank, which completely solves the problem of secondary pollution during garbage transportation. It has the advantages of high pressure, good sealing, easy operation, and safety.

Isuzu rear loader compactor truck adopts mechatronic and hydraulic integration technology, and adopts mechanical, electrical and hydraulic combined automatic control system. Through special devices such as carriage, loader and push shovel, it can realize garbage loading, crushing or flattening, and strong loading. Finally, the garbage is compacted and squeezed into the carriage, and transported to the destination for automatic unloading.

Its outstanding features: simple and efficient garbage collection method, with functions such as repeated compression and peristaltic compression, high compression ratio, large loading mass, automatic operation, good power and environmental protection, and high vehicle utilization efficiency.

Isuzu rear loader compactor truck is an efficient urban waste collection tool. Here are three steps to use rear loader compactor truck:

1. Start and prepare:

a. Before using Isuzu rear loader compactor truck, first make sure the vehicle is in good working condition. Check whether the fuel, oil, coolant, etc. are sufficient, and whether the various functions of the vehicle are normal.

b. Start the engine and let the vehicle warm up for a while to ensure that the engine is in the best working condition.

c. Check whether the compression device, loading mechanism and other parts are intact and ensure that there is no damage or looseness.

2. Loading garbage:

a. Drive the Isuzu rear loader compactor truck to the garbage collection point and ensure that the vehicle is parked stably.

b. Open the loading port of the garbage truck and pour the garbage into the loading port. When pouring the garbage, be careful not to exceed the capacity of the loading port to avoid damage to the equipment or inconvenience in operation.

c. Use the compression device of the garbage truck to compress the garbage. By operating the button or handle on the control panel, start the compression device to compress the garbage into a more compact form to improve loading efficiency.

d. During the loading process, always pay attention to the loading situation of the garbage truck to ensure that the garbage does not overflow or block the loading port.

3. Unloading and cleaning:

a. When the garbage truck is full, it needs to be driven to the garbage disposal station for unloading. Before unloading, make sure that the receiving equipment of the garbage disposal station is in normal working condition.

b. Use the unloading mechanism of the garbage truck to unload the garbage. By operating the button or handle on the control panel, start the unloading mechanism and push the compressed garbage into the receiving equipment of the garbage disposal station.

c. After unloading, the garbage truck needs to be cleaned. Clean the loading port, compression device, unloading mechanism and other parts of the garbage truck to ensure that there is no residual garbage or dirt. At the same time, check whether the various functions of the vehicle are normal for next use.